Yangbo's Blog

Posts Tagged ‘642-902’

受不了老！

 

书也不想看了！  

坐等明天的642-902的考试！

 

    Passive-interface 将一个接口指定为被动接口！然而这个命令在RIP和OSPF/EIGRP中却有不同的表现。

 

    下面我们通过实验来解析一下这个命令。

实验所用的TOP还是上一篇日志用到的TOP。IP规划也同上面一样。
上一篇日志的地址为：（CCNP 642-902 Distribute-list in the RIP.）http://yangbo.name/archives/1155.html

因为本站是的VPS是在国外的，且支持IPv6访问。如果你在拥有IPv6接入我建议你使用IPv6方式访问，一个是免费、二个是IPv6的出国速度也比IPv4较快一点点（教育网）。

 

Passive-interface of RIP

Passive-interface of EIGRP

Passive-interface of OSPF

 总结

Read the rest of this entry »

Question:

    study this exhibit below carefully.what is the effect of the distribute-list command in the R1 configure?

 

Topology:

Use IOU test this topology.

Read the rest of this entry »

Exam Description

The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP®, Cisco Certified Internetwork Professional CCIP®, and Cisco Certified Design Professional CCDP® certifications. The ROUTE 642-902 exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs.  The exam also covers configuration of secure routing solutions to support branch offices and mobile workers.

Exam Topics

The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes the guidelines below may change at any time without notice.

Implement an EIGRP based solution, given a network design and a set of requirements

• Determine network resources needed for implementing EIGRP on a network
• Create an EIGRP implementation plan
• Create an EIGRP verification plan
• Configure EIGRP routing
• Verify EIGRP solution was implemented properly using show and debug commands
• Document results of EIGRP implementation and verification

Implement a multi-area OSPF Network, given a network design and a set of requirements

• Determine network resources needed for implementing OSPF on a network
• Create an OSPF implementation plan
• Create an OSPF verification plan
• Configure OSPF routing
• Verify OSPF solution was implemented properly using show and debug commands
• Document results of OSPF implementation and verification plan

Implement an eBGP based solution, given a network design and a set of requirements

• Determine network resources needed for implementing eBGP on a network
• Create an eBGP implementation plan
• Create an eBGP verification plan
• Configure eBGP routing
• Verify eBGP solution was implemented properly using show and debug commands
• Document results of eBGP implementation and verification plan

Implement an IPv6 based solution, given a network design and a set of requirements

• Determine network resources needed for implementing IPv6 on a network
• Create an IPv6 implementation plan
• Create an IPv6 verification plan
• Configure IPv6 routing
• Configure IPv6 interoperation with IPv4
• Verify IPv6 solution was implemented properly using show and debug commands
• Document results of IPv6 implementation and verification plan

Implement an IPv4 or IPv6 based redistribution solution, given a network design and a set of requirements

• Create a redistribution implementation plan based upon the results of the redistribution analysis
• Create a redistribution verification plan
• Configure a redistribution solution
• Verify that a redistribution was implemented
• Document results of a redistribution implementation and verification plan
• Identify the differences between implementing an IPv4 and IPv6 redistribution solution

Implement Layer 3 Path Control Solution

• Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
• Create a Layer 3 path control verification plan
• Configure Layer 3 path control
• Verify that a Layer 3 path control  was implemented
• Document results of a Layer 3 path control implementation and verification plan
• Implement basic teleworker and branch services
• Describe broadband technologies
• Configure basic broadband connections
• Describe basic VPN technologies
• Configure GRE
• Describe branch access technologies

Cisco CCNP Pack 2010 | DVD + ebook | ISO/PDF | 1.7GB
Genre : eLearning

Material: Lab Guides, Quick Reference,Offical Cert Guide and Video’s
Details :
Cisco Network Troubleshooting Video Mentor DVD
Cisco Press CCNP ROUTE 642-902 Cert Kit DVD
Cisco Press CCNP SWITCH 642-813 Cert Kit DVD
Route + Switch + TShoot ebooks
Download

 

 

http://hotfile.com/list/500287/9a0d7a8

新版 CCNP 学习用书 CCNP ROUTE 642-902

 

新版 CCNP 学习用书 CCNP SWITCH 642-813

新版 CCNP 学习用书 CCNP TSHOOT 642-832

Read the rest of this entry »

 

Read the rest of this entry »